Portable Appliance Testing - FAQ - What appliances need testing

What types of appliances need testing?

Basically, any type of equipment, which is powered by electrical energy.

The IET Code of Practice for In-Service Inspection and Testing of Electrical Equipment states that this Code of Practice covers:

Portable Appliances:
An appliance of less than 18 kg in mass that is intended to be moved while in operation or an appliance which can easily be moved from one place to another, e.g. toaster, food mixer, vacuum cleaner, fan heater.

Movable Equipment (sometimes called Transportable):
This is equipment, which is either: 18 kg or less in mass and not fixed, e.g. electric fire, or equipment with wheels, castors or other means to facilitate movement by the operator as required to perform its intended use, e.g. air conditioning unit.

Hand-held Appliances:
This is portable equipment intended to be held in the hand during normal use, e.g. hair dryer, drill, soldering iron

Stationary Equipment or Appliances:
This equipment has a mass exceeding 18 kg and is not provided with a carrying handle, e.g. refrigerator, washing machine.

Fixed Equipment/Appliances:
This is equipment of an appliance, which is fastened to a support or otherwise secured in a specified location, e.g. bathroom heater, towel rail.

Appliances/Equipment for Building in:
This equipment is intended to be installed in a prepared recess such as a cupboard or similar. In general, equipment for building in does not have an enclosure on all sides because on one or more of the sides, additional protection against electric shock is provided by the surroundings e.g. a built-in electric cooker.

Information Technology Equipment (Business Equipment):
Information technology equipment includes electrical business equipment such as computer and mains powered telecommunications equipment, and other equipment for general business use, such as mail processing machines, electric plotters, trimmers, VDUs, data terminal equipment, typewriters, telephones, printers, photo-copiers, power packs.

Extension Leads:
The use of extension leads should be avoided where possible. If used, they should be tested as portable appliances. It is recommended that 3-core leads (including a protective earthing conductor) be used.

A standard 13 A 3-pin extension socket-outlet with a 2-core cable should never be used even if the appliance to be used in Class II, as it would not provide protection against electrical shock if used at any time with an item of Class I equipment.

The length of an extension lead for general use should not exceed the following:
- Core Area Maximum Length
- 1.25mm2 12 metres
- 1.5mm2 15 metres
- 2.5mm2 25 metres*
- 2.5mm2 cables are too large for standard 13 A plugs, but they may be used with BS EN 60309 industrial plugs.

These maximum lengths are not applicable to the flex of an appliance, for guidance refer to paragraph 15.13 (IEE Code of Practice for In-Service Inspection and Testing of Electrical Equipment).

If extension lead lengths do exceed the above, they shall be protected by a 30 mA RCD manufactured to BS 7071.

Back To PAT Testing FAQ